Bibcode
Cozar-Castellano, J.; Belío-Asín, M.; Soler, M.; Mato, A.; Núñez Cagigal, M.; Barreto, M.; Funes, I.; García-Cosío, M.; García-Hidalgo, A.; González, J. M.; Lacasta, H.; Padilla-Hernández, C.; Vega, N.; Collados, M.
Referencia bibliográfica
Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation VII
Fecha de publicación:
8
2026
Número de citas
0
Número de citas referidas
0
Descripción
The European Solar Telescope (EST) is a 4.2-m solar telescope, based on an aplanatic Gregorian configuration with an alt-azimuthal mount. EST has an open configuration for observations without dome, which allows the use of the Heat Rejecter (HR). The HR is a cooled mirror with a central hole located at the prime focus of the telescope. The main objective of the HR is to reject solar radiation out of the science field of view. Thus, allowing the reduction of the amount of thermal load reaching the subsequent optical elements and prevent the seeing degradation. The challenge, presented in the design of the HR, is the small envelope available for the thermal control system, which shall dissipate a thermal load of 1400W. Furthermore, the surface temperature of the mirror shall maintain a temperature deviation to ambient air within +/-3ºC during observation. Some trade-off analysis like jet impingement or cooling coil and sectored or non-sectored were performed. A thermal prototype has been developed to verify the key requirements for the correct operation of the HR. This prototype has been manufactured at a 1:1 scale in copper by additive manufacturing. Another critical component of the HR is the pointing system, which will be assembled to the Telescope Structure, to collect the scattered energy on the HR to determine the location of the sun disk and feed the Telescope Control System to improve the pointing accuracy. This contribution outlines the preliminary design of the HR, the main analyses and the prototype test to check the thermal requirements.