5-channel submicrometer measurement system

Front view of the submicrometric meter. Electronic device with an indicator needle and several connectors and pilot lamps
Organizational Unit
MECHANICS DEPARTMENT

Grants related:

Description

The submicrometric meter allows the measurement of mechanical displacements with an accuracy better than one micron. It is a device for control and data acquisition of mechanical probes with 5 independent channels. The range of movement of the probes is 1.5 mm with a precision in the measurement of 0.5 microns. The equipment is from the Mercer brand and model 225GD.

Related Technical facility
General view of the Mechanical Integration and Verification Laboratory. Medium-sized laboratory with work benches, electronic devices, mechanical tools and cabinets
Mechanical Integration and Verification Laboratory
The Mechanical Integration and Verification Laboratory provides the basic and specific infrastructures needed for the development and integration of the medium-sized mechanical systems developed at the Technology Division.
Alberto
Hernández González
View of one of the components of the vibration measurement and analysis equipment. Medium-sized device on a table whose front face has 8 blocks of indicators and buttons
Vibration measurement and analysis equipment
The purpose of this equipment is the measurement and analysis of mechanical vibrations
Related Capability
Image of an engineer working on the final assembly of the grisms wheel of the EMIR instrument in the laboratory. Large black metal wheel with holes for optical components
Design, development and manufacture of opto-mechanical systems and precision mechanics
The mechanical engineering team of the IAC has experience and knowledge to undertake the design, manufacture and assembly of high precision structures, mechanisms and opto-mechanical systems
Type
Mechanic
Equiment type
Sensor

It may interest you

  • Image of the portable measuring arm in the laboratory. Machine in the form of a pull-out arm placed on a tripod
    Portable measuring arm
    Portable high precision contact measurement equipment
  • General view of the Mechanical Integration and Verification Laboratory. Medium-sized laboratory with work benches, electronic devices, mechanical tools and cabinets
    Mechanical Integration and Verification Laboratory
    The Mechanical Integration and Verification Laboratory provides the basic and specific infrastructures needed for the development and integration of the medium-sized mechanical systems developed at the Technology Division.
    Alberto
    Hernández González
  • Panoramic view of the CAD studio with engineers working with desktop computers
    CAD/CAE Studio
    The CAD/CAE room concentrates the special facilities for mechanical engineering design and calculation.
    Afrodisio
    Vega Moreno