Quadrupole mass spectrometer

Image of the quadrupole mass spectrometer in the laboratory. Close-up view of the medium-sized metallic cube device placed on a table with electronic connectors on its back
Organizational Unit
MECHANICS DEPARTMENT

Grants related:

Description

The quadrupole mass spectrometer is a off-the-shelf gas analyzer that is used for the monitoring and analysis of the contamination in high vacuum systems and processes. It is also used for the detection of small vacuum leaks in cryostats.

Related Technical facility
General view of several test cryostats in a laboratory cabinet. Shelves of a cabinet with different metal cylinders fitted with windows and connectors
Test cryostats
Open-cycle, closed loop and hybrid multi-purpose test cryostats.
Panoramic view of one the areas of the Assembly, Integration and Verification room. Large laboratory with work benches and multiple electronic devices and computers, with a large mechanical structure in assembly phase
Large Instruments Assembly, Integration and Verification Room (AIV)
The purpose of the AIV Room is the assembly, integration and verification of instrumentation for large telescopes.
Marcos
Reyes García-Talavera
General view of the Mechanical Integration and Verification Laboratory. Medium-sized laboratory with work benches, electronic devices, mechanical tools and cabinets
Mechanical Integration and Verification Laboratory
The Mechanical Integration and Verification Laboratory provides the basic and specific infrastructures needed for the development and integration of the medium-sized mechanical systems developed at the Technology Division.
Alberto
Hernández González
Related Capability
Rear view of the EMIR instrument in GTC with engineers working on the cryogenic system. Large cylindrical structure with metallic tubes and electronic controls
Design, development and manufacture of cryogenic and vacuum systems
The astronomical observation in the infrared range of the spectrum requires the use of cryogenic systems where high vacuum and very low temperature technologies are combined.
Type
Mechanic
Equiment type
Analyser

It may interest you

  • Image of the portable measuring arm in the laboratory. Machine in the form of a pull-out arm placed on a tripod
    Portable measuring arm
    Portable high precision contact measurement equipment
  • Front view of the submicrometric meter. Electronic device with an indicator needle and several connectors and pilot lamps
    5-channel submicrometer measurement system
    Electronic equipment for measuring mechanical movements with high-precision
  • General view of the Mechanical Integration and Verification Laboratory. Medium-sized laboratory with work benches, electronic devices, mechanical tools and cabinets
    Mechanical Integration and Verification Laboratory
    The Mechanical Integration and Verification Laboratory provides the basic and specific infrastructures needed for the development and integration of the medium-sized mechanical systems developed at the Technology Division.
    Alberto
    Hernández González